qtechnology.net

Home > Socket Error > Error Wsaeacces

Error Wsaeacces

Contents

Solutions There are couple of solutions for this error. WinSock description: Same as Berkeley. This can be possibly done by an antivirus program. No more results can be returned by the WSALookupServiceNext function.

However, there's little distinction between WSAEALREADY and WSAEINVAL since a WinSock DLL cannot tell the difference between an asynchronous operation that has been cancelled and one that was never valid. A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram was smaller than the A call to the WSALookupServiceEnd function was made while this call was still processing. WSAEADDRNOTAVAIL 10049 Cannot assign requested address.

Socket Error 10054

WSAECONNRESET (10054) Connection reset by peer. WinSock functions: socket() See also: WSAEPROTOTYPE, WSAEPROTONOSUPPORT WSAESTALE (10070) Stale NFS file handle. Berkeley description: A pathname lookup involved more than 8 symbolic links.

If there is more than one Winsock DLL on your system, be sure the first one in the path is appropriate for the network subsystem currently loaded. WSASERVICE_NOT_FOUND 10108 Service not found. The requested service provider could not be loaded or initialized. Socket Error 10054 Connection Reset By Peer The router may be misconfigured so the router is notable to communicate with the target server.

A retry at some time later may be successful. Socket Error Codes Linux Advertisement Nickolodeon Thread Starter Joined: Apr 14, 2010 Messages: 35 Hi, guys. WinSock functions: WSAEACCES (10013) Permission denied. For inet_addr(), this could mean the content of the buffer passed or the buffer itself is invalid.

This usually results from trying to connect to a service that is inactive on the foreign host. Socket Error 11004 Access to Raw Sockets is granted on a per-transport basis. WinSock description: No equivalent. This usually results from trying to connect to a service that is inactive on the foreign host—that is, one with no server application running.

Socket Error Codes Linux

WinSock description: NOT same as Berkeley, but analogous. This error is returned if either a service provider's DLL could not be loaded (LoadLibrary failed) or the provider's WSPStartup or NSPStartup function failed. Socket Error 10054 WSAENOTSOCK 10038 Socket operation on nonsocket. Socket Error 10053 WSA_QOS_EFILTERTYPE 11020 Invalid QoS filter type.

I'm going to experiment with linker options though, because I need any user to run the app, not just admin. Tech Support Guy is completely free -- paid for by advertisers and donations. A reserved policy element was found in the QoS provider-specific buffer.   Requirements Header Winsock2.h; Winerror.h See also Error Codes - errno, h_errno and WSAGetLastError Handling Winsock Errors FormatMessage WSAGetLastError   But tweaking the linker configs is. Socket Error 10049

WSAEADDRINUSE 10048 Address already in use. If you don't have the proper subnet mask, your network system may treat a local address as a remote address (so it forwards addresses on the local subnet to the router, It also occurs with functions that take a socket handle and a sockaddr structure as input parameters. WSANO_DATA (11004) Valid name, no data record of requested type Berkeley description: The requested name is valid, but does not have an Internet IP address at the name server.

An example is using a broadcast address for sendto without broadcast permission being set using setsockopt(SO_BROADCAST). Winsock Error 10054 Fix Not the answer you're looking for? Check your WinSock implementation documentation to be sure all necessary components are currently installed and configured correctly.

Developer suggestions: Don't call bind() in a client application.

I also found this on the MSDN site: Note To use a socket of type SOCK_RAW requires administrative privileges. WSAEINPROGRESS 10036 Operation now in progress. WSA_QOS_EPSFLOWSPEC 11027 Invalid QoS provider-specific flowspec. Socket Error 10061 Connection Refused This message has a slightly different meaning from WSAEAFNOSUPPORT.

Typically, though, WinSock generates WSAENETUNREACH when it receives a "host unreachable" ICMP message from a router instead of WSAEHOSTUNREACH. Note that this error is returned by the operating system, so the error number may change in future releases of Windows. The errors that have User suggestions are all the same ones in the "User-fixable errors" list above. Socket Error 10013 The error message says “Permission denied”.

Berkeley description: A socket operation was attempted to an unreachable network. When the WSAEACCES error is returned, TDIMon displays the SHARING_VIOLATION error, returned at the TDI level PrevUpNext2.6.6.Global protection against socket hijackingHome2.7.The missing network loopback interface Home Microsoft Computers How To Menu WinSock description: Either your application hasn't called WSAStartup(), or WSAStartup() failed, or--possibly--you are accessing a socket which the current active task does not own (i.e. Alternately, you can get the local IP address by calling gethostname() followed by gethostbyname().

This error is returned if an incorrect protocol is explicitly requested in the socket call, or if an address of the wrong family is used for a socket, for example, in Some WinSock implementation use these errors inappropriately, but they have a particular meaning. WSAETOOMANYREFS 10059 Too many references. Berkeley description: A write to an ordinary file, the creation of a directory or symbolic link, or the creation of a directory entry failed because the user's quota of disk blocks

This can also result from connect, sendto, WSAConnect, WSAJoinLeaf, or WSASendTo when the remote address or port is not valid for a remote computer (for example, address or port 0). Any application that uses a blocking socket or calls any blocking functions must handle this error. The v1.1 specification also lists connect(), although it does not allocate a descriptor. the protocol stack that the WinSock DLL runs over).

WSAEMFILE 10024 Too many open files. It is normal for WSAEWOULDBLOCK to be reported as the result from calling connect on a nonblocking SOCK_STREAM socket, since some time must elapse for the connection to be established. Berkeley description: A connect or send request failed because the connected party did not properly respond after a period of time. (The timeout period is dependent on the communication protocol.) WinSock All rights reserved.